ID: 1222152
Tuotekoodi: WD100EFGX
Varastossa 21 yksiköt
Takuu: 3 vuotta
Western Digital Red Plus, 10TB, 7200rpm, 512MB, SATA III, CMR
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
-
Postin pakettiautomaatti1-2 työpäivän kuluessa6,99 € -
Postitoimisto1-2 työpäivän kuluessa6,99 €
-
Toimitus Posti-kuriirin postin välityksellä1-2 työpäivän kuluessa10,99 €
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 10 TB
- Dataliittymä: SATA III
- Karan pyörimisnopeus: 7200 rpm
- Tietopuskuri: 512 MB
Kuvaus
Dateks tarjoaa ostettavaksi Western Digital -kiintolevyn, jossa on 10 TB tallennuskapasiteetti, SATA III -liitäntä, 7200 rpm pyörimisnopeus ja 512 MB välimuisti.
Tässä kiintolevyssä on SATAIII-liitäntä. SATAIII eli SATA 6GB/s on viimeisimmän sukupolven tiedonsiirtoyhteys, joka löytyy nykyaikaisimmista tietokoneista ja jolla varmistetaan SATAII-mahdollisuudet ylittävä riittävä SSD-levyjen tiedonkulku. Kiintolevyjen välimuistin nopeus voi joskus ylittää myös SATAII:n läpivientimahdollisuudet, koska tämä välimuisti on pohjimmiltaan pienikokoinen SDD-levy (~64 Mb). Siksi on suositeltavaa valita SATAIII-levy, jos emolevyllä on vastaava portti.
Magneettilevyjen 7200 rpm pyörimisnopeuden ansiosta tämä kiintolevy tarjoaa optimaalisen nopean toiminnan tiedonhaussa ja -siirrossa. 7200 rpm on klassinen standardi universaaliin käyttöön sekä käyttöjärjestelmän ja sovellusten ylläpitoon että tietojen arkistointiin.
Tässä kiintolevyssä on SATAIII-liitäntä. SATAIII eli SATA 6GB/s on viimeisimmän sukupolven tiedonsiirtoyhteys, joka löytyy nykyaikaisimmista tietokoneista ja jolla varmistetaan SATAII-mahdollisuudet ylittävä riittävä SSD-levyjen tiedonkulku. Kiintolevyjen välimuistin nopeus voi joskus ylittää myös SATAII:n läpivientimahdollisuudet, koska tämä välimuisti on pohjimmiltaan pienikokoinen SDD-levy (~64 Mb). Siksi on suositeltavaa valita SATAIII-levy, jos emolevyllä on vastaava portti.
Magneettilevyjen 7200 rpm pyörimisnopeuden ansiosta tämä kiintolevy tarjoaa optimaalisen nopean toiminnan tiedonhaussa ja -siirrossa. 7200 rpm on klassinen standardi universaaliin käyttöön sekä käyttöjärjestelmän ja sovellusten ylläpitoon että tietojen arkistointiin.
Kaikki parametrit
Kapasiteetti
10 TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Käytä
: NAS
Dataliittymä
SATA III
Kiintolevyn liittäminen tietokoneeseen. Nykyinen teollisuusstandardi on SATA-liitäntä. IDE-liitäntä on käytettävissä vanhemmissa tietokoneissa. Ennen kiintolevyn ostamista on tarkistettava, onko emolevyllä vapaa liitäntäpaikka ja onko se tuki valitulle levykapasiteetille.
Karan pyörimisnopeus
7200 rpm
Kiintolevyn kierrokset. Useimpien pöytätietokoneiden kiintolevyissä on 7200 kierrosta minuutissa, ja tästä on jo tullut alan standardi. Jos haluat saavuttaa suuremman nopeuden, kannattaa ostaa kiintolevy, jonka kierrosluku on 10000rpm. 10000 kierrosta minuutissa pyörivien kiintolevyjen toimintamelu, lämpötila ja virrankulutus ovat paljon korkeammat kuin 7200 kierrosta minuutissa pyörivien kiintolevyjen parametrit, joten ennen 10000 kierrosta minuutissa pyörivän kiintolevyn ostamista on tarkistettava, että kotelo, virtalähde ja jäähdytys vastaavat tämän kiintolevyn teknisiä vaatimuksia.
Tietopuskuri
512 MB
Tietopuskuri on kiintolevyn sisäänrakennettu nopea muisti, jonka avulla levy voi vastaanottaa tietoja tasaisella nopeudella riippumatta siitä, kuinka paljon levyn fyysistä muistia on ladattu kyseisellä hetkellä. Jos työskentelet suurella määrällä pieniä tiedostoja (asiakirjoja, valokuvia jne.), suosittelemme ostamaan kiintolevyn, jossa on vähintään 8 Mt:n datapuskuri.
Yksityiskohtaisempi erittely
ARTIKEL1 - 10TB RED PLUS 512MB CMR 3.5IN
ARTIKEL2 - SATA 6 GB/S
Buffer - 512 MB
Category 1 - Festplatten
Category1 - HDD Raid
Category 2 - Interne Festplatten
Category Code - HDS
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 3.5 inch
Certification Other features - BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL
Color - Red
Component for Features - NAS
Data recording technology - CMR
Depth - 146.99 mm
Depth Weight & dimensions - 147 mm
Description - High-performance hard drives designed for performance, reliability, and energy efficiency in small- and medium-sized NAS environments.
WD Red Plus drives are designed to withstand the demands of home users and small- and medium-sized business NAS environments. WD Red Plus drives deliver the speed and capacity needed to store, protect, and share growing amounts of data in mid-sized NAS systems optimized for RAID operation with improved energy efficiency.
Suitable for NAS systems with NASware technology
Western Digital's exclusive NASware technology precisely adjusts drive parameters to NAS system workloads, helping to improve performance and reliability.
Designed for 24/7 operation
NAS systems run continuously, so a reliable hard drive is paramount. WD Red Plus hard drives are designed for systems running 24/7, giving users the confidence of reliable data access.
Compatibility Tested
Western Digital partners with numerous NAS system vendors, conducting extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Reduced Total Cost of Ownership
WD Red Plus drives are designed to consume less power (compared to previous models) and operate at a lower temperature, reducing operating costs and helping to reduce heat in thermally demanding NAS enclosures.
Power Supply for Robust Performance
Despite lower power consumption, the drives have high throughput to meet the mixed performance demands of multi-drive NAS systems.
Balanced for Improved Reliability
Improperly balanced hard drives can cause excessive vibration and noise in multi-drive systems. This results in degraded drive performance and a shorter lifespan. Enhanced dual-plane balance technology significantly improves balance and increases overall drive performance and reliability.
Backed by World-Class Technical Support and Warranty
As a leading hard drive manufacturer, Western Digital is confident in its NAS storage solutions and offers a 3-year limited warranty and world-class technical support for worry-free data storage.
Comparing Traditional Desktop Drives and WD Red Plus It's important to choose a drive specifically designed for NAS systems, optimized for RAID, to ensure optimal performance and preserve your valuable data. When choosing a hard drive for your NAS system, consider the following: Compatibility: Unlike desktop drives, WD Red Plus hard drives are specifically designed and tested for NAS systems and feature NASware technology, which precisely adjusts drive parameters to NAS workloads for optimal performance. Reliability: Desktop drives are typically not designed for the 24/7 operation that NAS systems are typically designed for. WD Red Plus hard drives are designed to withstand the harsh conditions found in high-intensity, 24/7, multi-user NAS environments. RAID Support: Unlike most desktop drives, which are configured for general use, WD Red hard drives feature RAID error recovery to help minimize failures in a multi-drive NAS system. Noise and Vibration Protection: Designed for standalone operation, desktop drives do not offer adequate protection against the vibration and noise experienced in multi-drive systems. WD Red hard drives are equipped with Rotational Vibration (RV) sensors that anticipate and actively address the increased vibrations often encountered in multi-drive NAS systems.
Description - Powerful internal HDDs designed for performance, reliability and power efficiency in small to medium NAS environments.
WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimized NAS systems with increased power efficiency.
Description1 - WD HDD Red Plus - 10 TB - 3.5" - SATA 6Gb/s
Description2 - The WD Red Plus internal hard drive is engineered for NAS systems and ensures performance and reliability for continuous use. With a storage capacity of 10 TB, it is well-suited for users looking to store extensive amounts of data over time. The hard drive supports data transfer rates of up to 600 MBps and operates at a spindle speed of 7200 rpm, providing consistent data management for various applications. Its features like NASware technology and 3D Active Balance Plus enhance its functionality, making it a choice for both personal and professional storage solutions.Designed to operate 24/7, the WD Red Plus is built to handle workloads of up to 180 TB per year while maintaining a low sound emission level of 39 dBA. With an MTBF of 1,000,000 hours, this hard drive is durable and reliable against operational failures, ensuring data remains safe and accessible. Specifications such as Native Command Queuing and Conventional Magnetic Recording add to its precision in data handling, making it a solid investment for any NAS setup.
Designation - CE+WEEE
dimensionalWeight - 94
dimension depth - 25 mm
dimension height - 100 mm
dimension weight - 550 g
dimension width - 150 mm
Disk type - HDD
Drive type - Internal
ean - 718037906201
EAN - 0718037906201
EANCode - 0718037906201
EAN_code - 0718037906201
Features - Certification - BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL
Features - Component for - NAS
Features - HDD average transfer rate - 260 MB/s
Features - HDD capacity - 10 TB
Features - HDD size - 3.5"
Features - HDD speed - 7200 RPM
Features - Hot-swap - No
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2500000 h
Features - Storage drive buffer size - 512 MB
Features - Type - HDD
Features - Workload rate limit - 180 TB/year
Form factor (width) - 3,5'' (LFF)
Gross Weight Kg - 0,83
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Hard Drive Sata
guarantee - 36
guarantee_type - normal
HDD average transfer rate Features - 215 MB/s
HDD capacity - 10 TB
HDD capacity Features - 10 TB
HDD Family name - Red Plus
HDD interface - SATA
HDD interface transfer rate Features - 6 Gbit/s
HDD size Features - 3.5"
HDD speed Features - 7200 RPM
Height - 26.11 mm
Height Weight & dimensions - 26.1 mm
HERSTELLER - WESTERN DIGITAL
HSTNUMMER - WD100EFGX
Interface Features - Serial ATA III
Manufacturer - Western Digital
Manufacturer Code - WD100EFGX
ManufacturerID - WD100EFGX
Manufacturer Name - Western Digital
Manufacturer_code - WD100EFGX
Mean time between failures (MTBF) Features - 1000000 h
Model - WD100EFGX
Model - WD Red Plus
MPN - WD100EFGX
Name - 10TB WD100EFGX WD Red Plus 7200RPM 512MB
name - HDD Disk Red Plus 10TB 3,5 512MB/7200RPM WD100EFGX
Name - HDD SATA 10TB 5400RPM 512MB/RED PLUS WD100EFGX WDC
Name - Western Digital Red Plus NAS HDD 10 TB (SATA 6 Gb/s, 3,5", 24/7)
Non-operating shock Operational conditions - 250 G
Operating shock Operational conditions - 30 G
Operating temperature (T-T) Operational conditions - 0 - 65 °C
Operating voltage Power - 12 V
Operational conditions - Operating temperature (T-T) - 0 - 65 °C
Operational conditions - Storage temperature (T-T) - -40 - 70 °C
Other features - Operating temperature: 0°C to 65°C
PackageHeight - 63
PackageLength - 184
PackageWeight - 750
PackageWidth - 151
Power consumption (idle) Power - 6.1 W
Power consumption (read) Power - 8.8 W
Power consumption (standby) Power - 0.3 W
Power consumption (write) Power - 8.8 W
producer - Western Digital
producerCode - WD100EFGX
productName - Western Digital Red WD100EFGX internal hard drive 3.5" 10 TB Serial ATA III
Product Net Weight ELKO Logistics Data - 0.4 kg
productSize - Normal
Quantity per pack Packaging data - 1 pc(s)
Rotational Speed - 7200 RPM
Safety warning - Warnings - Do not drop and avoid strong impacts.
Safety warning - Warnings - Do not expose to high temperatures or moisture.
Safety warning - Warnings - Do not open or disassemble.
Shipping Box Depth ELKO Internal Logistics Data - 49.5 cm
Shipping Box Height ELKO Internal Logistics Data - 21 cm
Shipping Box Weight ELKO Internal Logistics Data - 14 kg
Shipping Box Width ELKO Internal Logistics Data - 27 cm
Short description - WD HD3.5" SATA3 10TB WD100EFGX / 24x7 / NAS (Di) 512MB / 7200rpm / CMR
sizeX - 150
sizeY - 30
sizeZ - 105
Start/stop cycles Features - 600000
Stck_Kart - 20
Stck_Pal - 200
Storage drive buffer size Features - 256 MB
Storage temperature (T-T) Operational conditions - -40 - 70 °C
Storno - Y
Summary - Western Digital Red Plus WD100EFGX. HDD capacity: 10 TB, HDD speed: 7200 RPM, Storage drive buffer size: 256 MB, HDD size: 3.5", Interface: Serial ATA III
TBW - 180 TB
Type Features - HDD
Unit Box Height - 0.105
Unit Box Length - 0.15
Unit Box Width - 0.03
Unit Calculated Volume ELKO Internal Logistics Data - 0.001403 cubm
Unit Calculated Weight ELKO Logistics Data - 0.7 kg
Unit Depth ELKO Logistics Data - 15 cm
Unit Height ELKO Logistics Data - 10.5 cm
Units per Pallet ELKO Logistics Data - 0
Units per Shipping Box ELKO Logistics Data - 20
Unit Width ELKO Logistics Data - 3 cm
Vendor Homepage - https://www.westerndigital.com/products/internal-drives/wd-red-plus-sata-3-5-hdd?sku=WD101EFBX
vendpn - WD100EFGX
Warranty - 36L months
warrantyLength - 36
Warranty period Other features - 3 year(s)
warrantyType - G
WEEE - DE56989651
Weight - 0,74
Weight - 0.75 kg
Weight - 0.738
weight - 715
Weight & dimensions - Depth - 26.1 mm
Weight & dimensions - Height - 147 mm
Weight & dimensions - Weight - 750 g
Weight & dimensions - Width - 101.6 mm
Weight Weight & dimensions - 750 g
Width - 101.6 mm
Width Weight & dimensions - 101.6 mm
Workload rate limit Features - 180 TB/year
ARTIKEL2 - SATA 6 GB/S
Buffer - 512 MB
Category 1 - Festplatten
Category1 - HDD Raid
Category 2 - Interne Festplatten
Category Code - HDS
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 3.5 inch
Certification Other features - BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL
Color - Red
Component for Features - NAS
Data recording technology - CMR
Depth - 146.99 mm
Depth Weight & dimensions - 147 mm
Description - High-performance hard drives designed for performance, reliability, and energy efficiency in small- and medium-sized NAS environments.
WD Red Plus drives are designed to withstand the demands of home users and small- and medium-sized business NAS environments. WD Red Plus drives deliver the speed and capacity needed to store, protect, and share growing amounts of data in mid-sized NAS systems optimized for RAID operation with improved energy efficiency.
Suitable for NAS systems with NASware technology
Western Digital's exclusive NASware technology precisely adjusts drive parameters to NAS system workloads, helping to improve performance and reliability.
Designed for 24/7 operation
NAS systems run continuously, so a reliable hard drive is paramount. WD Red Plus hard drives are designed for systems running 24/7, giving users the confidence of reliable data access.
Compatibility Tested
Western Digital partners with numerous NAS system vendors, conducting extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Reduced Total Cost of Ownership
WD Red Plus drives are designed to consume less power (compared to previous models) and operate at a lower temperature, reducing operating costs and helping to reduce heat in thermally demanding NAS enclosures.
Power Supply for Robust Performance
Despite lower power consumption, the drives have high throughput to meet the mixed performance demands of multi-drive NAS systems.
Balanced for Improved Reliability
Improperly balanced hard drives can cause excessive vibration and noise in multi-drive systems. This results in degraded drive performance and a shorter lifespan. Enhanced dual-plane balance technology significantly improves balance and increases overall drive performance and reliability.
Backed by World-Class Technical Support and Warranty
As a leading hard drive manufacturer, Western Digital is confident in its NAS storage solutions and offers a 3-year limited warranty and world-class technical support for worry-free data storage.
Comparing Traditional Desktop Drives and WD Red Plus It's important to choose a drive specifically designed for NAS systems, optimized for RAID, to ensure optimal performance and preserve your valuable data. When choosing a hard drive for your NAS system, consider the following: Compatibility: Unlike desktop drives, WD Red Plus hard drives are specifically designed and tested for NAS systems and feature NASware technology, which precisely adjusts drive parameters to NAS workloads for optimal performance. Reliability: Desktop drives are typically not designed for the 24/7 operation that NAS systems are typically designed for. WD Red Plus hard drives are designed to withstand the harsh conditions found in high-intensity, 24/7, multi-user NAS environments. RAID Support: Unlike most desktop drives, which are configured for general use, WD Red hard drives feature RAID error recovery to help minimize failures in a multi-drive NAS system. Noise and Vibration Protection: Designed for standalone operation, desktop drives do not offer adequate protection against the vibration and noise experienced in multi-drive systems. WD Red hard drives are equipped with Rotational Vibration (RV) sensors that anticipate and actively address the increased vibrations often encountered in multi-drive NAS systems.
Description - Powerful internal HDDs designed for performance, reliability and power efficiency in small to medium NAS environments.
WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimized NAS systems with increased power efficiency.
Description1 - WD HDD Red Plus - 10 TB - 3.5" - SATA 6Gb/s
Description2 - The WD Red Plus internal hard drive is engineered for NAS systems and ensures performance and reliability for continuous use. With a storage capacity of 10 TB, it is well-suited for users looking to store extensive amounts of data over time. The hard drive supports data transfer rates of up to 600 MBps and operates at a spindle speed of 7200 rpm, providing consistent data management for various applications. Its features like NASware technology and 3D Active Balance Plus enhance its functionality, making it a choice for both personal and professional storage solutions.Designed to operate 24/7, the WD Red Plus is built to handle workloads of up to 180 TB per year while maintaining a low sound emission level of 39 dBA. With an MTBF of 1,000,000 hours, this hard drive is durable and reliable against operational failures, ensuring data remains safe and accessible. Specifications such as Native Command Queuing and Conventional Magnetic Recording add to its precision in data handling, making it a solid investment for any NAS setup.
Designation - CE+WEEE
dimensionalWeight - 94
dimension depth - 25 mm
dimension height - 100 mm
dimension weight - 550 g
dimension width - 150 mm
Disk type - HDD
Drive type - Internal
ean - 718037906201
EAN - 0718037906201
EANCode - 0718037906201
EAN_code - 0718037906201
Features - Certification - BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL
Features - Component for - NAS
Features - HDD average transfer rate - 260 MB/s
Features - HDD capacity - 10 TB
Features - HDD size - 3.5"
Features - HDD speed - 7200 RPM
Features - Hot-swap - No
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2500000 h
Features - Storage drive buffer size - 512 MB
Features - Type - HDD
Features - Workload rate limit - 180 TB/year
Form factor (width) - 3,5'' (LFF)
Gross Weight Kg - 0,83
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Hard Drive Sata
guarantee - 36
guarantee_type - normal
HDD average transfer rate Features - 215 MB/s
HDD capacity - 10 TB
HDD capacity Features - 10 TB
HDD Family name - Red Plus
HDD interface - SATA
HDD interface transfer rate Features - 6 Gbit/s
HDD size Features - 3.5"
HDD speed Features - 7200 RPM
Height - 26.11 mm
Height Weight & dimensions - 26.1 mm
HERSTELLER - WESTERN DIGITAL
HSTNUMMER - WD100EFGX
Interface Features - Serial ATA III
Manufacturer - Western Digital
Manufacturer Code - WD100EFGX
ManufacturerID - WD100EFGX
Manufacturer Name - Western Digital
Manufacturer_code - WD100EFGX
Mean time between failures (MTBF) Features - 1000000 h
Model - WD100EFGX
Model - WD Red Plus
MPN - WD100EFGX
Name - 10TB WD100EFGX WD Red Plus 7200RPM 512MB
name - HDD Disk Red Plus 10TB 3,5 512MB/7200RPM WD100EFGX
Name - HDD SATA 10TB 5400RPM 512MB/RED PLUS WD100EFGX WDC
Name - Western Digital Red Plus NAS HDD 10 TB (SATA 6 Gb/s, 3,5", 24/7)
Non-operating shock Operational conditions - 250 G
Operating shock Operational conditions - 30 G
Operating temperature (T-T) Operational conditions - 0 - 65 °C
Operating voltage Power - 12 V
Operational conditions - Operating temperature (T-T) - 0 - 65 °C
Operational conditions - Storage temperature (T-T) - -40 - 70 °C
Other features - Operating temperature: 0°C to 65°C
PackageHeight - 63
PackageLength - 184
PackageWeight - 750
PackageWidth - 151
Power consumption (idle) Power - 6.1 W
Power consumption (read) Power - 8.8 W
Power consumption (standby) Power - 0.3 W
Power consumption (write) Power - 8.8 W
producer - Western Digital
producerCode - WD100EFGX
productName - Western Digital Red WD100EFGX internal hard drive 3.5" 10 TB Serial ATA III
Product Net Weight ELKO Logistics Data - 0.4 kg
productSize - Normal
Quantity per pack Packaging data - 1 pc(s)
Rotational Speed - 7200 RPM
Safety warning - Warnings - Do not drop and avoid strong impacts.
Safety warning - Warnings - Do not expose to high temperatures or moisture.
Safety warning - Warnings - Do not open or disassemble.
Shipping Box Depth ELKO Internal Logistics Data - 49.5 cm
Shipping Box Height ELKO Internal Logistics Data - 21 cm
Shipping Box Weight ELKO Internal Logistics Data - 14 kg
Shipping Box Width ELKO Internal Logistics Data - 27 cm
Short description - WD HD3.5" SATA3 10TB WD100EFGX / 24x7 / NAS (Di) 512MB / 7200rpm / CMR
sizeX - 150
sizeY - 30
sizeZ - 105
Start/stop cycles Features - 600000
Stck_Kart - 20
Stck_Pal - 200
Storage drive buffer size Features - 256 MB
Storage temperature (T-T) Operational conditions - -40 - 70 °C
Storno - Y
Summary - Western Digital Red Plus WD100EFGX. HDD capacity: 10 TB, HDD speed: 7200 RPM, Storage drive buffer size: 256 MB, HDD size: 3.5", Interface: Serial ATA III
TBW - 180 TB
Type Features - HDD
Unit Box Height - 0.105
Unit Box Length - 0.15
Unit Box Width - 0.03
Unit Calculated Volume ELKO Internal Logistics Data - 0.001403 cubm
Unit Calculated Weight ELKO Logistics Data - 0.7 kg
Unit Depth ELKO Logistics Data - 15 cm
Unit Height ELKO Logistics Data - 10.5 cm
Units per Pallet ELKO Logistics Data - 0
Units per Shipping Box ELKO Logistics Data - 20
Unit Width ELKO Logistics Data - 3 cm
Vendor Homepage - https://www.westerndigital.com/products/internal-drives/wd-red-plus-sata-3-5-hdd?sku=WD101EFBX
vendpn - WD100EFGX
Warranty - 36L months
warrantyLength - 36
Warranty period Other features - 3 year(s)
warrantyType - G
WEEE - DE56989651
Weight - 0,74
Weight - 0.75 kg
Weight - 0.738
weight - 715
Weight & dimensions - Depth - 26.1 mm
Weight & dimensions - Height - 147 mm
Weight & dimensions - Weight - 750 g
Weight & dimensions - Width - 101.6 mm
Weight Weight & dimensions - 750 g
Width - 101.6 mm
Width Weight & dimensions - 101.6 mm
Workload rate limit Features - 180 TB/year
