Kingston DC600M, 480GB
-
Postin pakettiautomaatti1-2 työpäivän kuluessa6,99 €
-
Toimitus Posti-kuriirin postin välityksellä1-2 työpäivän kuluessa10,99 €
- Kapasiteetti: 480 GB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 560 MB/s
- Kirjoitusnopeus (peräkkäinen): 470 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
/* XPG S70 */ ?>
SSD-teknologian lisäedut liittyvät aseman ainutlaatuiseen rakenteeseen. SSD-asemat tallentavat tiedot muistisiruille, joille on ominaista täysin äänetön toiminta, alhainen lämpötila ja pieni virrankulutus. Kaikki nämä ominaisuudet eroavat merkittävästi nykyään vanhentuneesta kiintolevyteknologiasta. /* Nobeigums */ ?>
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Augstums (mm) - 7 milimetrs
Brand - Kingston Technology
BrandPartCode - SEDC600M/480G
Category - Internal Solid State Drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Code - SEDC600M/480G
Color - Not applicable
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth - 100.1 mm
Depth Weight & dimensions - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Design > SSD form factor - 2.5"
Designation - CE+WEEE
dimensionalWeight - 37
dimension depth - 20 mm
dimension height - 190 mm
dimension weight - 50 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
Drive Writes Per Day (DWPD) - 876
Dziļums (mm) - 69.9 milimetrs
EAN - 740617334937
ean - 740617334937
EAN - 0740617334937
EANCode - 0740617334937
EAN kods - 740617334937
EAN_code - 0740617334937
External Data Bit Rate - 6 gigabits sekundē
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 41000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 480 GB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 876
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 470 MB/s
Flash Memory Cell Technology - Triple-Level Cell
Formas faktors - 2.5"
Form factor (width) - 2,5'' (SFF)
Gabali iepakojumā - 1
Garantija Produkti atgriežami - Jā
Garantijas apstiprināšanas kritēriji - Sērijas numurs
Garantijas termiņš (mēnesis) - 60 mēnesis(-i)
Gewicht - 0.08
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334937
GTIN - 740617334937
guarantee - 60
guarantee_type - normal
H/W PLP function Features - Yes
Hardware encryption Features - No
HDD capacity - 480 GB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height Weight & dimensions - 7 mm
HERSTELLER - KINGSTON
Hot-Plug support Features - Yes
HSTNUMMER - SEDC600M/480G
Iekļauti aksesuāri - Ātrā lietošanas pamācība
Iepakojuma augstums (mm) - 184.15 milimetrs
Iepakojuma garums (mm) - 9.14 milimetrs
Iepakojuma platums (mm) - 129.54 milimetrs
Iepakojuma svars Brutto (kg) - 0.05 kilograms
Iepakojuma svars Netto (kg) - 0.05 kilograms
Iepakojuma tips - Mazumtirdzniecība
Iepakojums kastē - 10
Ierīces atrašanās vieta - Internal
Interface Features - Serial ATA III
Kastes svars Brutto (kg) - 0.5 kilograms
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 959.95 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 480 GB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 470 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Maksimālā darba vides temperatūra - 70 Celsija grāds
Maksimālā nedarbojošās apkārtējās vides temperatūra - 85 Celsija grāds
Manufacturer - Kingston
Manufacturer_code - SEDC600M/480G
Master (outer) case gross weight Logistics data - 959.95 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Maximum Power Consumption - 3.6 Vats
Maximum Random Read Rate - 94000 IOPS
Maximum Random Write Rate - 41000 IOPS
Maximum Sequential Read Rate - 560 Megabaits sekundē
Maximum Sequential Write Rate - 470 Megabaits sekundē
Mean Time Between Failures - 2000000 stunda
Mean time between failures (MTBF) Features - 2000000 h
Memory Technology - 3D NAND
Memory type Features - 3D TLC NAND
Minimum Power Consumption - 1.6 Vats
Minimālā darba vides temperatūra - 0 Celsija grāds
Minimālā nedarbojošās apkārtējās vides temperatūra - -40 Celsija grāds
Model - DC600M
Model - SEDC600M/480G
MPN - SEDC600M/480G
Name - Ent. 2,5" 480GB Kingston DC600M
Name - Kingston DC600M 480 GB, SSD (SATA 6 Gb/s, 2.5 format)
Name - Kingston DC600M | 480 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
name - SSD drive DC600M 480GB
Nominālais svars - 92.34 kilograms
Non-operating vibration Operational conditions - 20 G
Non-Recoverable Errors - 1 per 10^17
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package depth Packaging data - 9.14 mm
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6993 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Package height Packaging data - 184.2 mm
Package weight Packaging data - 88.19 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 88.19 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 480 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Platums (mm) - 100 milimetrs
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
producer - Kingston
producerCode - SEDC600M/480G
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=230710142424262008&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - SEDC600M/480G
ProductDescription - Kingston 480G DC600M (Mixed-Use) 2.5'' Enterprise SATA SSD
ProductName - 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Products per master (outer) case Logistics data - 10 pc(s)
ProductType - SSD Server
Random read (4KB) Features - 94000 IOPS
Random read IOPS (max) - 94 K
Random write (4KB) Features - 41000 IOPS
Random write IOPS (max) - 41 K
Reading speed - 560 MB/s
Read latency Features - 200 µs
Read speed Features - 560 MB/s
Safety warning - Warnings - Do not open the appliance casing, risk of damage.
Safety warning - Warnings - In the event of damage, do not dispose of in the normal rubbish bin, contact the relevant electronics disposal unit.
Safety warning - Warnings - Protect from moisture and extreme temperatures.
ShortSummaryDescription - Kingston Technology 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 480 GB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 8
Solid State Drive Features - S.M.A.R.T.Power-loss Protection (data at rest)Enterprise
SSD capacity Features - 480 GB
SSD form factor Features - 2.5"
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storage Capacity - 480 gigabaits
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - Y
Summary - Kingston Technology 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 480 GB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 470 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Supports Data Channel - SATA III-600
Target workload Features - Mixed Use (MU)
TBW - 876 TB
TBW rating Features - 876
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Title - Kingston Technology 480G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.01
Unit Box Length - 0.18
Unit Box Width - 0.13
Unit Calculated Volume - 0.000234 cubm
Unit Calculated Weight - 0.09 kg
Units per Shipping Box - 1
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor - KINGSTON
Vendor Homepage - https://www.kingston.com/
vendpn - SEDC600M/480G
Vibration Tolerance Operating - 2.17G @ 7-800Hz
Vibration Tolerance Storage - 20G @ 10-2000Hz
Warranty - 60
Warranty - 60 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
warrantyLength - 60
warrantyType - G
Weight - 0,09
Weight - 0.087
Weight - 66 g
weight - 80
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 66 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 66 g
Width - 69.9 mm
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 470 MB/s
Writing speed - 470 MB/s
Ārējā krāsa - Melna

