ID: 889980
Tuotekoodi: MTFDDAK1T9TGA-1BC1ZABYYR
Varastossa 30 yksiköt
Takuu: 3 vuotta
Micron 5400 PRO, 1.92TB, SATA III
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
-
Postin pakettiautomaatti1-2 työpäivän kuluessa6,99 € -
Toimitus Posti-kuriirin postin välityksellä1-2 työpäivän kuluessa10,99 €
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 1.92TB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 540 MB/s
- Kirjoitusnopeus (peräkkäinen): 520 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
Kuvaus
Tarjoamme ostaa Micron 2.5" formaatin SSD-levy, jossa on 1.92TB suuri kapasiteetti.
SSD-teknologian lisäedut liittyvät aseman ainutlaatuiseen rakenteeseen. SSD-asemat tallentavat tiedot muistisiruille, joille on ominaista täysin äänetön toiminta, alhainen lämpötila ja pieni virrankulutus. Kaikki nämä ominaisuudet eroavat merkittävästi nykyään vanhentuneesta kiintolevyteknologiasta.
SSD-teknologian lisäedut liittyvät aseman ainutlaatuiseen rakenteeseen. SSD-asemat tallentavat tiedot muistisiruille, joille on ominaista täysin äänetön toiminta, alhainen lämpötila ja pieni virrankulutus. Kaikki nämä ominaisuudet eroavat merkittävästi nykyään vanhentuneesta kiintolevyteknologiasta.
Perustiedot
Kapasiteetti
1.92TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Tyyppi
: SATA
Lukunopeus (peräkkäinen)
540 MB/s
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus (peräkkäinen)
520 MB/s
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
Toiminnallisuus
Patterit
: Ei ole
Valaistus
: Ei ole
Satamat ja laitteet
Muotoilutekijä
2.5"
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
Liitäntä
: SATA III (6Gb/s)
Liitäntä
SATA
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
Tekniset tiedot
Muistin tyyppi
: TLC (Triple-Level Cell)
Satunnaisen lukemisen IOPS
: 95K
Satunnaisen kirjoituksen IOPS
: 33K
Kestävyys (TBW)
: Ei määritelty
Yksityiskohtaisempi erittely
Box Weight Brutto (kg) - 0.36 kg
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Component for Features - Laptop
Data transfer rate Features - 6 Gbit/s
Depth - 100.45 mm
Depth (mm) - 100.45 mm
Depth Weight & dimensions - 100.5 mm
Description -
Description - Micron delivers the industry’s most advanced SATA SSD. The Micron 5400 SSD’s proven architecture assures customers of Micron’s commitment to meeting their diverse storage needs. The Industry’s Most Advanced Data Center SATA SSD
The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds.
Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD. With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB. Get More Out of Your SATA Platforms
The Micron 5400 SSD is the world’s first 176-layer data center SATA SSD. It offers the industry’s broadest portfolio with more than enough performance to saturate typical network bandwidth and best-in-class mixed-use write performance (sequential and random writes). Fast and Easy to Qualify
Qualify Micron’s 11th generation data center SATA SSD with confidence, now with 176-layer NAND. It’s a proven and stable architecture trusted for generations by all major server OEMs5 and can be purchased in new servers and is available for upgrade to deployed moderate capacity SATA HDDs. Longer Life & Fewer Field Failures
The Micron 5400 SSD offers industry-leading reliability (MTTF) rating that is 50% higher than the other leading data center SATA SSD.6 It also delivers 50% higher endurance rating on M.2 PRO vs competing M.2, read-intensive data center SATA SSDs and 67% higher endurance rating on MAX vs competing mixed-use, data center SATA SSDs — all backed by Micron’s standard 5-year data center SSD warranty.
Designation - CE+WEEE
Device Location - Internal
dimensionalWeight - 13
dimension depth - 20 mm
dimension height - 100 mm
dimension weight - 76 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
Drive Writes Per Day (DWPD) - 1.5
ean - 649528934239
EAN Code - 649528934239
EAN_code - 0649528934239
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 1.5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 PRO
Features - Random read (4KB) - 95000 IOPS
Features - Random write (4KB) - 33000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Read Intensive (RI)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2.5" 7mm
Form factor (width) - 2,5'' (SFF)
guarantee - 60
guarantee_type - normal
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGA-1BC1ZABYYR
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.9 W
Maximum Random Read Rate - 95000 IOPS
Maximum Random Write Rate - 33000 IOPS
Maximum Sequential Read Rate - 540 MB/s
Maximum Sequential Write Rate - 520 MB/s
Mean Time Between Failures - 3000000 hr
Memory Technology - 3D NAND
Memory type Features - 3D TLC NAND
Minimum Operating Ambient Temperature - 0 °C
Model - 5400 PRO
Model - MTFDDAK1T9TGA-1BC1ZABYYR
Name - Micron 5400 PRO 1920 GB, SSD (black, SATA 6 Gb/s, 2.5")
name - SSD drive 5400 PRO 1920GB MTFDDAK1T9TGA-1BC1ZABYYR
Nominal Weight - 70 g
Non-Recoverable Errors - 10 per 10^17
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
Package Type - Retail
Packs in Box - 5
Pack Weight Brutto (kg) - 0.07 kg
Pieces in pack - 1
producer - Micron
producerCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=220829121905669851&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductDescription - Micron 5400 PRO 1920GB SATA 2.5'' (7mm) Non-SED SSD [Single Pack]
productName - SSD Micron 5400 PRO 1.92TB SATA 2.5" MTFDDAK1T9TGA-1BC1ZABYYR (DWPD 1.5)
productSize - Normal
ProductType - SSD Server
Random read (4KB) Features - 95000 IOPS
Random read IOPS (max) - 95 K
Random write (4KB) Features - 33000 IOPS
Random write IOPS (max) - 33 K
Reading speed - 540 MB/s
Security algorithms Features - 256-bit AES
sizeX - 130
sizeY - 100
sizeZ - 5
Solid State Drive Features - Power-loss Protection (data at rest)Non-SED
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - 5400 Pro
Storage Capacity - 1.92 TB
Summary - Micron 5400 PRO. SSD capacity: 1.92 TB, SSD form factor: 2.5", Data transfer rate: 6 Gbit/s, Component for: Laptop
Supports Data Channel - SATA III-600
Target workload Features - Read Intensive (RI)
Technical_details - The Micron 5400 PRO Series SATA Solid State Drives (SSDs) feature the latest 3D NAND technology with everything you would expect from Micron's broadest SATA portfolio in the industry. A 176-layer 3D TLC NAND flash drive with SATA interface, the Micron 5400 PRO offers high performance, consistency and reliability on a proven architecture. The Micron 5400 PRO SSD has a mean time to failure (MTTF) of 3 million device hours - 50% more than the norm. Added to this are Micron's solid firmware functions for extended data security. Item no.: 1878149 Type SSD Color: Black EAN 0649528934239 Manufacturer no. MTFDDAK1T9TGA-1BC1ZABYYR 5400 PRO series Design 2.5 inches Capacity 1.92TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Read data transfer rate 540 MB/s Write 33,000 Chip type TLC Power consumption operation 3 W IOPS Read 95,000 MTBF 3,000,000 hours Feature AES 256-bit Encryption, ATA Security, Power Failure Data Protection, Enterprise Data Path Protection, Adaptive Thermal Monitoring, Hot Plug Support, RAIN Technology Dimensions Width: 69.85mm x Height: 7mm x Depth/Length: 100.45mm Weight 70 grams
Uncorrectable Bit Error Rate (UBER) Features - < 1 per 10^17 bits read
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Calculated Volume - 0.000195 cubm
Unit Calculated Weight - 0.08 kg
Units per Shipping Box - 1
Vendor - MICRON
Vendor Homepage - https://www.micron.com/products/ssd/product-lines/5400
vendpn - MTFDDAK1T9TGA-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,08
Weight - 70 g
weight - 80
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 70 g
Width - 69.85 mm
Width (mm) - 69.85 mm
Width Weight & dimensions - 69.8 mm
Writing speed - 520 MB/s
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Component for Features - Laptop
Data transfer rate Features - 6 Gbit/s
Depth - 100.45 mm
Depth (mm) - 100.45 mm
Depth Weight & dimensions - 100.5 mm
Description -
Description - Micron delivers the industry’s most advanced SATA SSD. The Micron 5400 SSD’s proven architecture assures customers of Micron’s commitment to meeting their diverse storage needs. The Industry’s Most Advanced Data Center SATA SSD
The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds.
Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD. With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB. Get More Out of Your SATA Platforms
The Micron 5400 SSD is the world’s first 176-layer data center SATA SSD. It offers the industry’s broadest portfolio with more than enough performance to saturate typical network bandwidth and best-in-class mixed-use write performance (sequential and random writes). Fast and Easy to Qualify
Qualify Micron’s 11th generation data center SATA SSD with confidence, now with 176-layer NAND. It’s a proven and stable architecture trusted for generations by all major server OEMs5 and can be purchased in new servers and is available for upgrade to deployed moderate capacity SATA HDDs. Longer Life & Fewer Field Failures
The Micron 5400 SSD offers industry-leading reliability (MTTF) rating that is 50% higher than the other leading data center SATA SSD.6 It also delivers 50% higher endurance rating on M.2 PRO vs competing M.2, read-intensive data center SATA SSDs and 67% higher endurance rating on MAX vs competing mixed-use, data center SATA SSDs — all backed by Micron’s standard 5-year data center SSD warranty.
Designation - CE+WEEE
Device Location - Internal
dimensionalWeight - 13
dimension depth - 20 mm
dimension height - 100 mm
dimension weight - 76 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
Drive Writes Per Day (DWPD) - 1.5
ean - 649528934239
EAN Code - 649528934239
EAN_code - 0649528934239
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 1.5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 PRO
Features - Random read (4KB) - 95000 IOPS
Features - Random write (4KB) - 33000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Read Intensive (RI)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2.5" 7mm
Form factor (width) - 2,5'' (SFF)
guarantee - 60
guarantee_type - normal
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGA-1BC1ZABYYR
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.9 W
Maximum Random Read Rate - 95000 IOPS
Maximum Random Write Rate - 33000 IOPS
Maximum Sequential Read Rate - 540 MB/s
Maximum Sequential Write Rate - 520 MB/s
Mean Time Between Failures - 3000000 hr
Memory Technology - 3D NAND
Memory type Features - 3D TLC NAND
Minimum Operating Ambient Temperature - 0 °C
Model - 5400 PRO
Model - MTFDDAK1T9TGA-1BC1ZABYYR
Name - Micron 5400 PRO 1920 GB, SSD (black, SATA 6 Gb/s, 2.5")
name - SSD drive 5400 PRO 1920GB MTFDDAK1T9TGA-1BC1ZABYYR
Nominal Weight - 70 g
Non-Recoverable Errors - 10 per 10^17
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
Package Type - Retail
Packs in Box - 5
Pack Weight Brutto (kg) - 0.07 kg
Pieces in pack - 1
producer - Micron
producerCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=220829121905669851&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductDescription - Micron 5400 PRO 1920GB SATA 2.5'' (7mm) Non-SED SSD [Single Pack]
productName - SSD Micron 5400 PRO 1.92TB SATA 2.5" MTFDDAK1T9TGA-1BC1ZABYYR (DWPD 1.5)
productSize - Normal
ProductType - SSD Server
Random read (4KB) Features - 95000 IOPS
Random read IOPS (max) - 95 K
Random write (4KB) Features - 33000 IOPS
Random write IOPS (max) - 33 K
Reading speed - 540 MB/s
Security algorithms Features - 256-bit AES
sizeX - 130
sizeY - 100
sizeZ - 5
Solid State Drive Features - Power-loss Protection (data at rest)Non-SED
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - 5400 Pro
Storage Capacity - 1.92 TB
Summary - Micron 5400 PRO. SSD capacity: 1.92 TB, SSD form factor: 2.5", Data transfer rate: 6 Gbit/s, Component for: Laptop
Supports Data Channel - SATA III-600
Target workload Features - Read Intensive (RI)
Technical_details - The Micron 5400 PRO Series SATA Solid State Drives (SSDs) feature the latest 3D NAND technology with everything you would expect from Micron's broadest SATA portfolio in the industry. A 176-layer 3D TLC NAND flash drive with SATA interface, the Micron 5400 PRO offers high performance, consistency and reliability on a proven architecture. The Micron 5400 PRO SSD has a mean time to failure (MTTF) of 3 million device hours - 50% more than the norm. Added to this are Micron's solid firmware functions for extended data security. Item no.: 1878149 Type SSD Color: Black EAN 0649528934239 Manufacturer no. MTFDDAK1T9TGA-1BC1ZABYYR 5400 PRO series Design 2.5 inches Capacity 1.92TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Read data transfer rate 540 MB/s Write 33,000 Chip type TLC Power consumption operation 3 W IOPS Read 95,000 MTBF 3,000,000 hours Feature AES 256-bit Encryption, ATA Security, Power Failure Data Protection, Enterprise Data Path Protection, Adaptive Thermal Monitoring, Hot Plug Support, RAIN Technology Dimensions Width: 69.85mm x Height: 7mm x Depth/Length: 100.45mm Weight 70 grams
Uncorrectable Bit Error Rate (UBER) Features - < 1 per 10^17 bits read
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Calculated Volume - 0.000195 cubm
Unit Calculated Weight - 0.08 kg
Units per Shipping Box - 1
Vendor - MICRON
Vendor Homepage - https://www.micron.com/products/ssd/product-lines/5400
vendpn - MTFDDAK1T9TGA-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,08
Weight - 70 g
weight - 80
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 70 g
Width - 69.85 mm
Width (mm) - 69.85 mm
Width Weight & dimensions - 69.8 mm
Writing speed - 520 MB/s
