ID: 497489
Tuotekoodi: SKC600/2048G
Voidaan tilata 17 yksiköt Saatavuus: 14 päivää tilauksen hyväksymisestä
Takuu: 3 vuotta
Kingston KC600, 2048GB
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
-
Postin pakettiautomaatti1-2 työpäivän kuluessa6,99 € -
Postitoimisto1-2 työpäivän kuluessa6,99 €
-
Toimitus Posti-kuriirin postin välityksellä1-2 työpäivän kuluessa10,99 €
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 2 TB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 550 MB/s
- Kirjoitusnopeus (peräkkäinen): 520 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
Kuvaus
Tarjoamme ostaa Kingston 2.5" formaatin SSD-levy, jossa on 2 TB suuri kapasiteetti.
SSD-teknologian lisäedut liittyvät aseman ainutlaatuiseen rakenteeseen. SSD-asemat tallentavat tiedot muistisiruille, joille on ominaista täysin äänetön toiminta, alhainen lämpötila ja pieni virrankulutus. Kaikki nämä ominaisuudet eroavat merkittävästi nykyään vanhentuneesta kiintolevyteknologiasta.
SSD-teknologian lisäedut liittyvät aseman ainutlaatuiseen rakenteeseen. SSD-asemat tallentavat tiedot muistisiruille, joille on ominaista täysin äänetön toiminta, alhainen lämpötila ja pieni virrankulutus. Kaikki nämä ominaisuudet eroavat merkittävästi nykyään vanhentuneesta kiintolevyteknologiasta.
Perustiedot
Kapasiteetti
2 TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Tyyppi
: SATA
Lukunopeus (peräkkäinen)
550 MB/s
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus (peräkkäinen)
520 MB/s
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
Toiminnallisuus
Patterit
: Ei mitään
Valaistus
: Ei mitään
Satamat ja laitteet
Muotoilutekijä
2.5"
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
Liitäntä
: SATA III (6Gb/s)
Liitäntä
SATA
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
Määrittely
Muistin tyyppi
: TLC (Triple-Level Cell)
Satunnaisen lukemisen IOPS
: 90K
Satunnaisen kirjoituksen IOPS
: 80K
Kestävyys (TBW)
: 1200 TB
Yksityiskohtaisempi erittely
ARTIKEL1 - 2048G KC600 SATA3 2.5IN SSD
ARTIKEL2 - ONLY DRIVE
Brand - Kingston Technology
BrandPartCode - SKC600/2048G
Category - Internal Solid State Drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SSM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Black
Component for Features - PC/Laptop
Controller type Features - SMI SM2259
Country of origin Logistics data - China
Data transfer rate Features - 6 Gbit/s
Depth - 100.1 mm
Depth Weight & dimensions - 100.1 mm
Description - KC600 to dysk SSD firmy Kingston o wysokiej pojemności zaprojektowany tak, by zapewniał wyjątkowo dużą wydajność i optymalizację pod kątem szybkości reakcji. Zapewnia niezwykle szybkie uruchamianie systemu i aplikacji oraz przesyłanie danych. Dysk jest dostępny w obudowie formatu 2,5" i wyposażony w interfejs SATA 3.0, zgodny z wcześniejszymi wersjami interfejsu SATA. W dysku KC600 wykorzystano najnowszą technologię pamięci NAND 3D TLC, a pełen pakiet zabezpieczeń obejmuje szyfrowanie sprzętowe algorytmem z 256-bitowym kluczem, a także technologie TCG Opal i eDrive. Dysk oferuje odczyt i zapis z prędkością do 550/520MB/s1 i pojemność do 2TB2. Dysk jest dostępny w zestawie zawierającym wszystkie akcesoria niezbędne do prostej instalacji w komputerze stacjonarnym lub notebooku.
Description - Kingston’s KC600 is a full-capacity SSD designed to provide remarkable performance and optimised to provide functional system responsiveness with
incredible boot, loading and transfer times. It comes in both 2.5" and mSATA form factors using SATA Rev 3.0 interface with backwards compatibility.
The KC600 utilises the latest 3D TLC NAND technology while supporting a full security suite that includes AES 256-bit hardware encryption, TCG Opal
2.0 and eDrive. It features read/write speeds of up to 550/520MB/s1 to efficiently store your data up to 2TB2
.Remarkable performanceFeatures the latest 3D TLC NAND technologySupports a full security suite (TCG Opal, AES 256-bit, eDrive)Available in range of full capacities* Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash memory guide at kingston.com/flashguide.
** Based on “out-of-box performance” using a SATA Rev 3.0 motherboard. Speed may vary due to host hardware, software and usage. IOMETER random 4K read/write is based on 8GB partition.
*** Limited warranty based on 5 years or “SSD Life Remaining” which can be found using the Kingston SSD Manager (Kingston.com/SSDManager). A new, unused product will show a wear indicator value of one hundred (100), whereas a product that has reached its endurance limit of program erase cycles will show a wear indicator value of one (1). See Kingston.com/wa for details.
**** Total Bytes Written (TBW) is derived from the JEDEC Client Workload (JESD219A). ***** Operating system software support: Windows® 10, 8.1, 8, 7 (SP1).
Designation - CE+WEEE
dimensionalWeight - 48
dimension depth - 10 mm
dimension height - 180 mm
dimension weight - 60 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
ean - 740617304350
EAN - 0740617304350
EANCode - 0740617304350
EAN_code - 0740617304350
Export Control Classification Number (ECCN) Logistics data - EAR99
Features - Component for - PC/Laptop
Features - Controller type - SMI SM2259
Features - Data transfer rate - 6 Gbit/s
Features - Hardware encryption - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 90000 IOPS
Features - Random write (4KB) - 80000 IOPS
Features - Read speed - 550 MB/s
Features - Security algorithms - 256-bit AES-XTS
Features - Security algorithms - 256-bit AES-XTS, TCG Opal 2.0
Features - Security algorithms - TCG Opal 2.0
Features - SSD capacity - 2 TB
Features - SSD form factor - 2.5"
Features - TBW rating - 1200
Features - Write speed - 520 MB/s
Form factor (width) - 2,5'' (SFF)
Gewicht - 0.06
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617304350
GTIN - 740617304350
guarantee - 60
guarantee_type - normal
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
HDD capacity - 2048 GB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height Weight & dimensions - 7 mm
HERSTELLER - KINGSTON
HSTNUMMER - SKC600/2048G
Interface Features - Serial ATA III
Logistics data - Country of origin - China
Logistics data - Export Control Classification Number (ECCN) - EAR99
Logistics data - Harmonized System (HS) code - 84717070
Logistics data - Master (outer) case gross weight - 709.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s KC600 is a full-capacity SSD designed to provide remarkable performance and optimised to provide functional system responsiveness withincredible boot, loading and transfer times. It comes in both 2.5" and mSATA form factors using SATA Rev 3.0 interface with backwards compatibility.The KC600 utilises the latest 3D TLC NAND technology while supporting a full security suite that includes AES 256-bit hardware encryption, TCG Opal2.0 and eDrive. It features read/write speeds of up to 550/520MB/s1 to efficiently store your data up to 2TB2.
LongProductName - 2048G SSD KC600 SATA3 2.5"
LongSummaryDescription - Kingston Technology 2048G SSD KC600 SATA3 2.5". SSD capacity: 2 TB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 520 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop
Manufacturer - Kingston
Manufacturer_code - SKC600/2048G
Master (outer) case gross weight Logistics data - 709.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SKC600
MPN - SKC600/2048G
Name - 2.5" 2TB Kingston KC600
Name - Kingston KC600 2 TB, Solid State Drive (black, SATA 6 Gb / s, 2.5 ")
name - SSD KC600 SERIES 2TB SATA3 2..5 550/520 MB/s
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Power - Power consumption (average) - 0.2 W
Power - Power consumption (idle) - 0.06 W
Power - Power consumption (read) - 1.3 W
Power - Power consumption (write) - 3.2 W
Power consumption (average) Power - 0.2 W
Power consumption (idle) Power - 0.06 W
Power consumption (read) Power - 1.3 W
Power consumption (write) Power - 3.2 W
producer - Kingston
producerCode - SKC600/2048G
ProductName - 2048G SSD KC600 SATA3 2.5"
productName - Kingston Technology 2048G SSD KC600 SATA3 2.5"
productSize - Normal
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 90000 IOPS
Random write (4KB) Features - 80000 IOPS
Reading speed - 550 MB/s
Read speed Features - 550 MB/s
Security algorithms Features - 256-bit AES-XTS, TCG Opal 2.0
ShortSummaryDescription - Kingston Technology 2048G SSD KC600 SATA3 2.5", 2 TB, 2.5", 550 MB/s, 6 Gbit/s
sizeX - 185
sizeY - 10
sizeZ - 130
SSD capacity Features - 2 TB
SSD form factor Features - 2.5"
SSD series - KC600
Stck_Kart - 50
Stck_Pal - 0
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - Y
Summary - Kingston Technology 2048G SSD KC600 SATA3 2.5". SSD capacity: 2 TB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 520 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop
TBW - 1200 TB
TBW rating Features - 1200
Title - Kingston Technology 2048G SSD KC600 SATA3 2.5"
Unit Box Height - 0.01
Unit Box Length - 0.182
Unit Box Width - 0.13
Unit Calculated Volume - 0.0002477 cubm
Unit Calculated Weight - 0.071 kg
Units per Pallet - 0
Units per Shipping Box - 50
URL - https://www.kingston.com/
Vendor Homepage - https://www.kingston.com/
vendpn - SKC600/2048G
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support ***
warrantyLength - 60
warrantyType - G
Weight - 0,04
Weight - 0.058
Weight - 40 g
weight - 55
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 40 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 40 g
Width - 69.85 mm
Width Weight & dimensions - 69.8 mm
Write speed Features - 520 MB/s
Writing speed - 520 MB/s
ARTIKEL2 - ONLY DRIVE
Brand - Kingston Technology
BrandPartCode - SKC600/2048G
Category - Internal Solid State Drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SSM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Black
Component for Features - PC/Laptop
Controller type Features - SMI SM2259
Country of origin Logistics data - China
Data transfer rate Features - 6 Gbit/s
Depth - 100.1 mm
Depth Weight & dimensions - 100.1 mm
Description - KC600 to dysk SSD firmy Kingston o wysokiej pojemności zaprojektowany tak, by zapewniał wyjątkowo dużą wydajność i optymalizację pod kątem szybkości reakcji. Zapewnia niezwykle szybkie uruchamianie systemu i aplikacji oraz przesyłanie danych. Dysk jest dostępny w obudowie formatu 2,5" i wyposażony w interfejs SATA 3.0, zgodny z wcześniejszymi wersjami interfejsu SATA. W dysku KC600 wykorzystano najnowszą technologię pamięci NAND 3D TLC, a pełen pakiet zabezpieczeń obejmuje szyfrowanie sprzętowe algorytmem z 256-bitowym kluczem, a także technologie TCG Opal i eDrive. Dysk oferuje odczyt i zapis z prędkością do 550/520MB/s1 i pojemność do 2TB2. Dysk jest dostępny w zestawie zawierającym wszystkie akcesoria niezbędne do prostej instalacji w komputerze stacjonarnym lub notebooku.
Description - Kingston’s KC600 is a full-capacity SSD designed to provide remarkable performance and optimised to provide functional system responsiveness with
incredible boot, loading and transfer times. It comes in both 2.5" and mSATA form factors using SATA Rev 3.0 interface with backwards compatibility.
The KC600 utilises the latest 3D TLC NAND technology while supporting a full security suite that includes AES 256-bit hardware encryption, TCG Opal
2.0 and eDrive. It features read/write speeds of up to 550/520MB/s1 to efficiently store your data up to 2TB2
.Remarkable performanceFeatures the latest 3D TLC NAND technologySupports a full security suite (TCG Opal, AES 256-bit, eDrive)Available in range of full capacities* Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash memory guide at kingston.com/flashguide.
** Based on “out-of-box performance” using a SATA Rev 3.0 motherboard. Speed may vary due to host hardware, software and usage. IOMETER random 4K read/write is based on 8GB partition.
*** Limited warranty based on 5 years or “SSD Life Remaining” which can be found using the Kingston SSD Manager (Kingston.com/SSDManager). A new, unused product will show a wear indicator value of one hundred (100), whereas a product that has reached its endurance limit of program erase cycles will show a wear indicator value of one (1). See Kingston.com/wa for details.
**** Total Bytes Written (TBW) is derived from the JEDEC Client Workload (JESD219A). ***** Operating system software support: Windows® 10, 8.1, 8, 7 (SP1).
Designation - CE+WEEE
dimensionalWeight - 48
dimension depth - 10 mm
dimension height - 180 mm
dimension weight - 60 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
ean - 740617304350
EAN - 0740617304350
EANCode - 0740617304350
EAN_code - 0740617304350
Export Control Classification Number (ECCN) Logistics data - EAR99
Features - Component for - PC/Laptop
Features - Controller type - SMI SM2259
Features - Data transfer rate - 6 Gbit/s
Features - Hardware encryption - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 90000 IOPS
Features - Random write (4KB) - 80000 IOPS
Features - Read speed - 550 MB/s
Features - Security algorithms - 256-bit AES-XTS
Features - Security algorithms - 256-bit AES-XTS, TCG Opal 2.0
Features - Security algorithms - TCG Opal 2.0
Features - SSD capacity - 2 TB
Features - SSD form factor - 2.5"
Features - TBW rating - 1200
Features - Write speed - 520 MB/s
Form factor (width) - 2,5'' (SFF)
Gewicht - 0.06
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617304350
GTIN - 740617304350
guarantee - 60
guarantee_type - normal
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
HDD capacity - 2048 GB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height Weight & dimensions - 7 mm
HERSTELLER - KINGSTON
HSTNUMMER - SKC600/2048G
Interface Features - Serial ATA III
Logistics data - Country of origin - China
Logistics data - Export Control Classification Number (ECCN) - EAR99
Logistics data - Harmonized System (HS) code - 84717070
Logistics data - Master (outer) case gross weight - 709.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s KC600 is a full-capacity SSD designed to provide remarkable performance and optimised to provide functional system responsiveness withincredible boot, loading and transfer times. It comes in both 2.5" and mSATA form factors using SATA Rev 3.0 interface with backwards compatibility.The KC600 utilises the latest 3D TLC NAND technology while supporting a full security suite that includes AES 256-bit hardware encryption, TCG Opal2.0 and eDrive. It features read/write speeds of up to 550/520MB/s1 to efficiently store your data up to 2TB2.
LongProductName - 2048G SSD KC600 SATA3 2.5"
LongSummaryDescription - Kingston Technology 2048G SSD KC600 SATA3 2.5". SSD capacity: 2 TB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 520 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop
Manufacturer - Kingston
Manufacturer_code - SKC600/2048G
Master (outer) case gross weight Logistics data - 709.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SKC600
MPN - SKC600/2048G
Name - 2.5" 2TB Kingston KC600
Name - Kingston KC600 2 TB, Solid State Drive (black, SATA 6 Gb / s, 2.5 ")
name - SSD KC600 SERIES 2TB SATA3 2..5 550/520 MB/s
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Power - Power consumption (average) - 0.2 W
Power - Power consumption (idle) - 0.06 W
Power - Power consumption (read) - 1.3 W
Power - Power consumption (write) - 3.2 W
Power consumption (average) Power - 0.2 W
Power consumption (idle) Power - 0.06 W
Power consumption (read) Power - 1.3 W
Power consumption (write) Power - 3.2 W
producer - Kingston
producerCode - SKC600/2048G
ProductName - 2048G SSD KC600 SATA3 2.5"
productName - Kingston Technology 2048G SSD KC600 SATA3 2.5"
productSize - Normal
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 90000 IOPS
Random write (4KB) Features - 80000 IOPS
Reading speed - 550 MB/s
Read speed Features - 550 MB/s
Security algorithms Features - 256-bit AES-XTS, TCG Opal 2.0
ShortSummaryDescription - Kingston Technology 2048G SSD KC600 SATA3 2.5", 2 TB, 2.5", 550 MB/s, 6 Gbit/s
sizeX - 185
sizeY - 10
sizeZ - 130
SSD capacity Features - 2 TB
SSD form factor Features - 2.5"
SSD series - KC600
Stck_Kart - 50
Stck_Pal - 0
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - Y
Summary - Kingston Technology 2048G SSD KC600 SATA3 2.5". SSD capacity: 2 TB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 520 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop
TBW - 1200 TB
TBW rating Features - 1200
Title - Kingston Technology 2048G SSD KC600 SATA3 2.5"
Unit Box Height - 0.01
Unit Box Length - 0.182
Unit Box Width - 0.13
Unit Calculated Volume - 0.0002477 cubm
Unit Calculated Weight - 0.071 kg
Units per Pallet - 0
Units per Shipping Box - 50
URL - https://www.kingston.com/
Vendor Homepage - https://www.kingston.com/
vendpn - SKC600/2048G
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support ***
warrantyLength - 60
warrantyType - G
Weight - 0,04
Weight - 0.058
Weight - 40 g
weight - 55
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 40 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 40 g
Width - 69.85 mm
Width Weight & dimensions - 69.8 mm
Write speed Features - 520 MB/s
Writing speed - 520 MB/s
