ID: 1310925
Tuotekoodi: SEDC600M/1920G
Varastossa 24 yksiköt
Takuu: 3 vuotta
Kingston DC600M, 1.92TB, SATA III
Kuva voi poiketa todellisesta tuotteesta, ja tuotteessa voi olla lisävarusteita ja osia, joita ei toimiteta varsinaisen tuotteen mukana.
-
Postin pakettiautomaatti1-2 työpäivän kuluessa6,99 € -
Toimitus Posti-kuriirin postin välityksellä1-2 työpäivän kuluessa10,99 €
Tärkeimmät tuoteparametrit Kaikki parametrit
- Kapasiteetti: 1.92TB
- Tyyppi: SATA
- Lukunopeus (peräkkäinen): 560 MB/s
- Kirjoitusnopeus (peräkkäinen): 530 MB/s
- Muotoilutekijä: 2.5"
- Liitäntä: SATA III (6Gb/s)
Kuvaus
Ostettavissa on suuren tilavuuden Kingston 2.5" formaatin SSD-levy, jonka tilavuus on 1.92TB.
Tämä levy käyttää standardia SATA -liitäntää, joka toimii perinteisten SATA-tieto- ja virtajohtojen kanssa.
Tämä levy käyttää SATA III -teknologiaa - vaikka se on vanhempi protokolla, SATA tyyppinen SSD-levy on edelleen erittäin hyödyllinen jokapäiväisiin tarpeisiin ja tapauksissa, joissa sinun on sovitettava tietty budjetti.
Tämän SSD-levyn lukunopeus (sekvensiaalinen lukunopeus) on 560 MB/s. Muista, että "nopeat" levyt ilman asianmukaista jäähdytysratkaisua eivät ehkä saavuta valmistajan ilmoittamia nopeuksia.
Tämän SSD:n kirjoitusnopeus (sekvensiaalinen kirjoitusnopeus) on 530 MB/s. Kuitenkin, jos riittävää jäähdytystä ei tarjota, "nopeat" asemat eivät ehkä saavuta valmistajan takaamia nopeuksia.
Tämä on SSD-levy 2.5" formaatissa.
Tällä SSD-levyllä on SATA III (6Gb/s) -liitäntä. Muista, että jos asennat levyä, jossa on uudempi liitäntä (esimerkiksi PCIe 4.0 tai 5.0), vanhemman liitäntäpaikan (esimerkiksi PCIe 3.0) sisään, levyn nopeus laskee, koska levyllä ei ole riittävää tiedonsiirtonopeutta (Bandwidth).
Perustiedot
Kapasiteetti
1.92TB
Kiintolevyn kapasiteetti gigatavuina ilmaisee, kuinka paljon tietoa kiintolevylle voidaan tallentaa. Kiintolevyn kapasiteetti on kiinteä, eikä sitä voi lisätä kiintolevyn ostamisen jälkeen. Siksi kiintolevyä ostaessasi sinun on tarkistettava, että se vastaa nykyisiä tilavuusvaatimuksiasi ja tarjoaa varauksen tulevia tarpeita varten.
Tyyppi
: SATA
Lukunopeus (peräkkäinen)
560 MB/s
Jaksollinen lukunopeus eli keskimääräinen tiedonlukunopeus on SSD-levyn nopean toiminnan tärkein kriteeri. SSD-levyltä luetaan tietoja paljon useammin kuin sinne kirjoitetaan, koska käyttöjärjestelmä tallentaa käsitellyt tiedot useimmiten RAM-muistiin.
Jos haluat, että ostamasi SSD-levyn lukunopeus ylittää huomattavasti klassisen kiintolevyn nopeuden, sinun kannattaa valita SSD-levy, jonka lukunopeus on vähintään 200 MB/s. Suorituskyvyn lisäys saavutetaan tiedonhaun (SeekTime) ansiosta, joka on SSD-levyillä paljon korkeammalla tasolla kuin kiintolevyillä.
Kirjoitusnopeus (peräkkäinen)
530 MB/s
Kirjoitusnopeus on lähes yhtä tärkeä kuin lukunopeus. Myös tämä parametri määrittää SSD-levyn suorituskyvyn, mutta koska kirjoittaminen levylle ei tapahdu yhtä usein kuin tietojen lukeminen ja keskivertokäyttäjän on subjektiivisesti vaikea erottaa mitään yli 100 MB/s nopeutta suuremmista indekseistä, lukuun ottamatta tapauksia, joissa SSD-levyä käytetään palvelimessa, äänen/videoiden tallentamiseen jne.
Toiminnallisuus
Patterit
: Ei ole
Valaistus
: Ei ole
Satamat ja laitteet
Muotoilutekijä
2.5"
SSD-tekniikan tarjoaman pienen koon ansiosta levyjen vakiokoko on 2,5 tuumaa, ja se sopii keskivertokannettavaan tietokoneeseen. Pöytäkoneeseen on mahdollista asentaa 2,5 tuuman levy, jos käytetään siirtymää 2,5" -> 3,5", ja tämän siirtymän voi ostaa edullisesti osoitteesta TopPC.fi kohdasta "Adapteri". 2,5" + 3,5" -muotoisissa levyissä on tämä siirtymä mukana.
1,8" levyt on tarkoitettu ultrakompaktin luokan kannettaviin tietokoneisiin.
PCI-Express SSD -levyt on tarkoitettu pöytätietokoneisiin, joissa on käytettävissä vapaa PCI-Express-liitin. Tätä tekniikkaa käytetään useimmissa tapauksissa varmistamaan suorituskyky, joka ylittää muiden liitäntätyyppien mahdollisuudet.
Liitäntä
: SATA III (6Gb/s)
Liitäntä
SATA
SATAII- ja SATAIII-liitännällä varustetut SSD-asemat ovat yhteensopivia emolevyn molempien liitäntätyyppien kanssa.
On kuitenkin otettavahuomioon, että emolevyn SATAII-liitäntä voi tarjota enintään noin 300 MB/s siirtokapasiteetin, mikä voi vähentää niiden SSD-asemien todellisen siirtokapasiteetin, joiden luku- ja/tai kirjoitusnopeus ylittää tämän tason, SATAII-liitännän kapasiteettirajoihin.
Tilanne on samanlainen PCI-Express- ja SATAIII-liitäntäpaikkojen kanssa. Vaikka SATAIII-standardi voi tarjota jopa 600 MB/s tiedonsiirtokapasiteetin, on SSD-asemia, joiden nopeus ylittää tämän rajan, jolloin valmistaja valitsee PCI-Express-liitäntäpaikan, jonka siirtokapasiteetti on suurempi. PCI-Express-levyjä ei voi liittää kannettavaan tietokoneeseen.
Tekniset tiedot
Muistin tyyppi
: TLC (Triple-Level Cell)
Satunnaisen lukemisen IOPS
: 94K
Satunnaisen kirjoituksen IOPS
: 78K
Kestävyys (TBW)
: 3504 TB
Yksityiskohtaisempi erittely
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category Code - SFM
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100.1 mm
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
H/W PLP function Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Hot-Plug support Features - Yes
Interface Features - Serial ATA III
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SEDC600M/1920G
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package depth Packaging data - 9.14 mm
Package height Packaging data - 184.2 mm
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 94000 IOPS
Random write (4KB) Features - 78000 IOPS
Read latency Features - 200 µs
Read speed Features - 560 MB/s
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Target workload Features - Mixed Use (MU)
TBW rating Features - 3504
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.2
Unit Box Length - 0.07
Unit Box Width - 0.014
Unit Calculated Volume - 0.000196 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 10
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor Homepage - https://www.kingston.com/
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category Code - SFM
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100.1 mm
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
H/W PLP function Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Hot-Plug support Features - Yes
Interface Features - Serial ATA III
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SEDC600M/1920G
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package depth Packaging data - 9.14 mm
Package height Packaging data - 184.2 mm
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 94000 IOPS
Random write (4KB) Features - 78000 IOPS
Read latency Features - 200 µs
Read speed Features - 560 MB/s
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Target workload Features - Mixed Use (MU)
TBW rating Features - 3504
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.2
Unit Box Length - 0.07
Unit Box Width - 0.014
Unit Calculated Volume - 0.000196 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 10
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor Homepage - https://www.kingston.com/
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
