ID: 967748
Product code: SEDC600M/1920G
In stock 4 units
Warranty: 3 years
Kingston DC600M, 1.92TB
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Posti parcel machineWithin 1-2 working days6.99 € -
Delivery with Posti courier mailWithin 1-2 working days10.99 €
Main product parameters All parameters
- Capacity: 1.92TB
- Type: SATA
- Read speed (sequential): 560 MB/s
- Write speed (sequential): 530 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
This Kingston brand SSD has a 1.92TB capacity and a 2.5" format.
This disk uses the standard SATA interface, which operates with traditional SATA data and power cables.
This disc uses SATA III technology - although it is an older protocol, the SATA type SSD disc is still very useful for everyday needs and in cases where you have to fit a certain budget.
560 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
530 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
This is an SSD disk in the 2.5" format.
This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
1.92TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
560 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
530 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: Not specified
Random Write IOPS
: Not specified
Endurance (TBW)
: 3504 TB
More detailed specification
ARTIKEL1 - 1920G DC600M 2.5IN SATA SSD
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Box Weight Brutto (kg) - 0.5 kg
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD
Code - SEDC600M/1920G
Color - Not applicable
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth - 100.1 mm
Depth (mm) - 69.9 mm
Depth Weight & dimensions - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Design > SSD form factor - 2.5"
Designation - CE+WEEE
Device Location - Internal
dimensionalWeight - 46
dimension depth - 20 mm
dimension height - 190 mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
Drive Writes Per Day (DWPD) - 3504
EAN - 740617334890
ean - 740617334890
EAN - 0740617334890
EAN Code - 740617334890
EANCode - 0740617334890
EAN_code - 0740617334890
External Color - Melna
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2.5"
Form factor (width) - 2,5'' (SFF)
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
guarantee - 60
guarantee_type - normal
H/W PLP function Features - Yes
Hardware encryption Features - No
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Height Weight & dimensions - 7 mm
HERSTELLER - KINGSTON
Hot-Plug support Features - Yes
HSTNUMMER - SEDC600M/1920G
Included Accessories - Īsa lietotāja rokasgrāmata
Interface Features - Serial ATA III
Link - https://www.kingston.com/en/memory/search?partid=SEDC600M/1920G
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/1920G
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Maximum Non-Operating Ambient Temperature - 85 °C
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.6 W
Maximum Random Read Rate - 94000 IOPS
Maximum Random Write Rate - 78000 IOPS
Maximum Sequential Read Rate - 560 MB/s
Maximum Sequential Write Rate - 530 MB/s
Mean Time Between Failures - 2000000 hr
Mean time between failures (MTBF) Features - 2000000 h
Memory Technology - 3D NAND
Memory type Features - 3D TLC NAND
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 0 °C
Minimum Power Consumption - 1.6 W
Model - DC600M
Model - SEDC600M/1920G
MPN - SEDC600M/1920G
Name - Ent. 2,5" 1.92TB Kingston DC600M
Name - Kingston DC600M 1920 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 1920 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
name - SSD drive DC600M 1920GB
Nominal Weight - 92.34 kg
Non-operating vibration Operational conditions - 20 G
Non-Recoverable Errors - 1 per 10^17
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package depth Packaging data - 9.14 mm
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7042 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Package height Packaging data - 184.2 mm
Package Type - Retail
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Packs in Box - 10
Pack Weight Brutto (kg) - 0.05 kg
Pack Weight Netto (kg) - 0.05 kg
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 1920 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Pieces in pack - 1
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
producer - Kingston
producerCode - SEDC600M/1920G
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=230710142424903314&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - SEDC600M/1920G
ProductDescription - Kingston 1920G DC600M (Mixed-Use) 2.5'' Enterprise SATA SSD
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Products per master (outer) case Logistics data - 10 pc(s)
ProductType - SSD Server
Random read (4KB) Features - 94000 IOPS
Random read IOPS (max) - 94 K
Random write (4KB) Features - 78000 IOPS
Random write IOPS (max) - 78 K
Reading speed - 560 MB/s
Read latency Features - 200 µs
Read speed Features - 560 MB/s
Safety warning - Warnings - Do not open the appliance casing, risk of damage.
Safety warning - Warnings - In the event of damage, do not dispose of in the normal rubbish bin, contact the relevant electronics disposal unit.
Safety warning - Warnings - Protect from moisture and extreme temperatures.
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 10
Solid State Drive Features - S.M.A.R.T.Power-loss Protection (data at rest)Enterprise
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storage Capacity - 1.92 TB
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - Y
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Supports Data Channel - SATA III-600
Target workload Features - Mixed Use (MU)
TBW - 3504 TB
TBW rating Features - 3504
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.01
Unit Box Length - 0.185
Unit Box Width - 0.13
Unit Calculated Volume - 0.0002405 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 1
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor - KINGSTON
Vendor Homepage - https://www.kingston.com/
vendpn - SEDC600M/1920G
Vibration Tolerance Operating - 2.17G @ 7-800Hz
Vibration Tolerance Storage - 20G @ 10-2000Hz
Warranty - 60
Warranty - 60 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,09
Weight - 0.091
Weight - 69 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width - 69.9 mm
Width (mm) - 100 mm
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
Writing speed - 530 MB/s
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Box Weight Brutto (kg) - 0.5 kg
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD
Code - SEDC600M/1920G
Color - Not applicable
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth - 100.1 mm
Depth (mm) - 69.9 mm
Depth Weight & dimensions - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Design > SSD form factor - 2.5"
Designation - CE+WEEE
Device Location - Internal
dimensionalWeight - 46
dimension depth - 20 mm
dimension height - 190 mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive type - Internal
Drive Writes Per Day (DWPD) - 3504
EAN - 740617334890
ean - 740617334890
EAN - 0740617334890
EAN Code - 740617334890
EANCode - 0740617334890
EAN_code - 0740617334890
External Color - Melna
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2.5"
Form factor (width) - 2,5'' (SFF)
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
guarantee - 60
guarantee_type - normal
H/W PLP function Features - Yes
Hardware encryption Features - No
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Height Weight & dimensions - 7 mm
HERSTELLER - KINGSTON
Hot-Plug support Features - Yes
HSTNUMMER - SEDC600M/1920G
Included Accessories - Īsa lietotāja rokasgrāmata
Interface Features - Serial ATA III
Link - https://www.kingston.com/en/memory/search?partid=SEDC600M/1920G
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/1920G
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Maximum Non-Operating Ambient Temperature - 85 °C
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.6 W
Maximum Random Read Rate - 94000 IOPS
Maximum Random Write Rate - 78000 IOPS
Maximum Sequential Read Rate - 560 MB/s
Maximum Sequential Write Rate - 530 MB/s
Mean Time Between Failures - 2000000 hr
Mean time between failures (MTBF) Features - 2000000 h
Memory Technology - 3D NAND
Memory type Features - 3D TLC NAND
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 0 °C
Minimum Power Consumption - 1.6 W
Model - DC600M
Model - SEDC600M/1920G
MPN - SEDC600M/1920G
Name - Ent. 2,5" 1.92TB Kingston DC600M
Name - Kingston DC600M 1920 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 1920 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
name - SSD drive DC600M 1920GB
Nominal Weight - 92.34 kg
Non-operating vibration Operational conditions - 20 G
Non-Recoverable Errors - 1 per 10^17
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package depth Packaging data - 9.14 mm
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7042 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Package height Packaging data - 184.2 mm
Package Type - Retail
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Packs in Box - 10
Pack Weight Brutto (kg) - 0.05 kg
Pack Weight Netto (kg) - 0.05 kg
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 1920 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Pieces in pack - 1
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
producer - Kingston
producerCode - SEDC600M/1920G
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=230710142424903314&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - SEDC600M/1920G
ProductDescription - Kingston 1920G DC600M (Mixed-Use) 2.5'' Enterprise SATA SSD
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Products per master (outer) case Logistics data - 10 pc(s)
ProductType - SSD Server
Random read (4KB) Features - 94000 IOPS
Random read IOPS (max) - 94 K
Random write (4KB) Features - 78000 IOPS
Random write IOPS (max) - 78 K
Reading speed - 560 MB/s
Read latency Features - 200 µs
Read speed Features - 560 MB/s
Safety warning - Warnings - Do not open the appliance casing, risk of damage.
Safety warning - Warnings - In the event of damage, do not dispose of in the normal rubbish bin, contact the relevant electronics disposal unit.
Safety warning - Warnings - Protect from moisture and extreme temperatures.
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 10
Solid State Drive Features - S.M.A.R.T.Power-loss Protection (data at rest)Enterprise
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storage Capacity - 1.92 TB
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - Y
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Supports Data Channel - SATA III-600
Target workload Features - Mixed Use (MU)
TBW - 3504 TB
TBW rating Features - 3504
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.01
Unit Box Length - 0.185
Unit Box Width - 0.13
Unit Calculated Volume - 0.0002405 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 1
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor - KINGSTON
Vendor Homepage - https://www.kingston.com/
vendpn - SEDC600M/1920G
Vibration Tolerance Operating - 2.17G @ 7-800Hz
Vibration Tolerance Storage - 20G @ 10-2000Hz
Warranty - 60
Warranty - 60 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,09
Weight - 0.091
Weight - 69 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width - 69.9 mm
Width (mm) - 100 mm
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
Writing speed - 530 MB/s
