Western Digital Red SA500, 2TB, SATA III
-
Posti parcel machineWithin 1-2 working days6.99 €
-
Post OfficeWithin 1-2 working days6.99 €
-
Posti courier deliveryWithin 1-2 working days10.99 €
- Capacity: 2 TB
- Type: SATA
- Max. reading speed (Seq. Read): 560 MB/s
- Max. writing speed (Seq. Write): 520 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
We offer to purchase a Western Digital 2.5" format SSD drive with a 2 TB capacity.
The disk is equipped with the traditional SATA port. It uses SATA data and power cables.
This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.
The read speed for this SSD drive reaches 560 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.
The writing speed for this SSD disk reaches 520 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.
This SSD drive has an 2.5" format.
This SSD disk has a SATA III (6Gb/s) interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.fi section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Category 1 - SSDs
Category 2 - Interne SSDs
Description1 - WD SSD Red SA500 WDS200T2R0A - 2 TB - 2.5" - SATA 6Gb/s
Description2 - The Power of Red Comes to SSDBoost your SSD NAS system’s performance and responsiveness with the WD Red™ SA500 NAS SATA SSD. Your NAS system is always on, making a reliable drive essential. Unlike standard NAS SSDs, WD Red NAS SATA SSDs are specifically designed and tested for 24/7 usage.Supercharge your NASDurability together with efficient caching of big files make the WD Red™ SA500 NAS SATA SSD ideal for OLTP databases, multi-user environments, photo rendering, 4K and 8K video editing and other demanding applications.Access big files fastWD Red™ SA500 500 GB SSD 2.5 inch SSD storage is optimized for caching in NAS systems to rapidly access your most frequently used content. Give it your tough workloadsWD Red™ SSD’s superior endurance can handle the heavy read and write loads demanded by NAS, giving you the reliability you need in a 24/7 environment. Work more efficientlyPurpose-built for NAS with proven Western Digital® 3D NAND, the WD Red™ NAS Solid State Drive delivers maximum SATA performance to boost your productivity and effectiveness at home or in the office.Use it for your demanding applicationsThe drive reduces latency and improves responsiveness for OLTP databases, multi-user environments, photo rendering, 4K and 8K video editing, and more.Build with flexibilityCustomize your NAS to meet your most demanding storage needs with capacities ranging from 500GB up to 4TB.
EAN - 0718037903613
Manufacturer - SanDisk
Manufacturer - Western Digital
ManufacturerID - WDS200T2R0A-68CKB0
MPN - WDS200T2R0A-68CKB0
Name - 2.5" 2TB WD Red SA500 NAS
PackageHeight - 25
PackageLength - 127
PackageWeight - 80
PackageWidth - 102
UPC - 718037903613
WEEE - DE83654239
Weight - 0.08

